Share:
Shrink Fit Chuck Standard Version
JIS B 6339 · BT30
Shrink fit chuck suitable to all kind of shrink fit units.
JIS B 6339 BT30.
Technical data subjects to change without prior notice.
Standard version, similar to DIN 69882-8.
Technical drawing
Please select your clamping diameter:
JIS B 6339 · BT30
Shrink fit chuck suitable to all kind of shrink fit units.
JIS B 6339 BT30.
- Heat resistant hot-working steel
- Hardened 54 – 2 HRC
- For HSS and solid carbide tools
- Shank tolerance h6
- Cooling with Cool Jet for an extra charge
- Cooling with Cool Flash for an extra charge
- Included in delivery: Backup screw
Technical data subjects to change without prior notice.
Standard version, similar to DIN 69882-8.
 |
The most important features: 1. High runout accuracy (< 0.003 mm) 2. Extreme clamping torque by high pressing in the clamping bore 3. Short chamfer 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity 5. Cool Jet (on request) 6. Threaded bores for simple and fast balancing with screws |
 |
Cool Jet (optional)
|
 |
Cool Flash (optional)
|
Technical drawing
Please select your clamping diameter:
| Clamping Ø D1 [mm] | Ø D2 [mm] ultra short | Ø D2 [mm] short | Ø D3 [mm] ultra short | Ø D3 [mm] short | L [mm] |
| 3 | 10 | 10 | - | - | 09 |
| 4 | 10 | 10 | - | - | 12 |
| 5 | 10 | 10 | - | - | 15 |
| 6 | 23 | 21 | - | 27 | 36 |
| 8 | 23 | 21 | - | 27 | 36 |
| 10 | 27 | 24 | - | 32 | 42 |
| 12 | 27 | 24 | - | 32 | 47 |
| 14 | 30 | 27 | - | 34 | 47 |
| 16 | 30 | 27 | - | 34 | 50 |
| 18 | 35,5 | 33 | 40,5 | 40,5 | 50 |
| 20 | 35,5 | 33 | 40,5 | 40,5 | 52 |
Inquiry - Haimer BT30
